SiMAP® case contains a power supply adapter, slots for 16 sensor modules, antenna for GSM data transfer and SiMAP controller which receives the measurement data from the wireless sensor modules. The case also relays the measurement data using GSM/GPRS radio modem to the server PC for storing, displaying and analyzing.

One case can receive and further transmit measurement data from even 64 sensor modules. Depending on the measurement needs the user selects the set of sensors needed from the sensor types available. Sensor modules are easy to store in the ready made slots of the SiMAP case between measurement periods.

Sensor RF-band:  433 MHz
GSM RF-band:  900/1800 MHz
SIM card:  Standards card with GPRS and SMS support (not included)
Power consumption:  10 W
Weight (without sensors):  1,5 kg
Dimentions:  357 x 305 x 110 mm
Material: Polypropylene IP20

Hum is a wireless battery operated sensor module to measure interior relative humidities and temperatures. This sensor is used for applications like drying process of concrete or mapping humidity problems in buildings.

Technical data, pdf.

Temp is a wireless battery operated sensor module to measure interior temperatures.
For applications like thermal mapping of the building.

Technical data, pdf.

ExtTemp is a wireless battery operated sensor module to measure interior/exterior temperatures. It has two PT1000 temperature sensor elements in the end of two wires.
This sensor is for applications like balancing heating radiators of the building or measuring boiler room heating pipes in/out temperatures.

Technical data, pdf.

ExtHum is a wireless battery operated sensor module to measure interior relative humidities and temperatures inside constructions.
For applications like drying process of concrete or mapping humidity problems in buildings.

Technical data, pdf.

CO2 sensor module is a wireless lines powered sensor module to measure carbon dioxide contents of the interior air.
For applications like monitoring the operation/quality of the airconditioning system.

Technical data: (TBD).

Server PC. Measurement software is installed into the laptop PC. Server software is used to configure and manage the whole measurement system.

 

MR01 Mobile Router. GPRS router routes the measurement data from one or more SiMAP cases to the Server PC. Easy to use WEB configuration interface. Requires a fixed IP-address from your internet service provider.

Technical data
Power consumption:  24Vdc/200 mA (5W) (separate plug in mains power module included)
Weight (without sensors): 100 g
Dimentions:  90 x 60 x 52 mm; DIN rail enclosure

Firewall box for safe Internet connection. Connected between the (ADSL) modem and the Mobile router MR01.

Technical data
See Zyxel Zywall 2 Plus for detailed data.

 

Sensor Signal Repeater amplifies the selected sensor modules transmission to the SiMAP® case. Various wall thicknesses, wall materials and distances set up challenges to the operating range of the sensor signal. Sensor Signal Repeater works as an amplifier to the sersors which are located outside the operating range of the system.

Technical data:
Max. 8 predefined sensor modules can be amplified
Sensor RF-band: 433 MHz
Power consumption:  9 Vdc/500 mA (5W) (separate plug in mains power module included)
Material: Plastic ABS IP20

External dual temperature sensor element

Cable length is 2 x 1,5 m.

HUM is a external humidity/temperature sensor element

Sensor element: 0,4m cable with diam.5,5mm x 35mm tip housing